Skip to main content
Welcome to Auspec Asset Integrity Services
Delivering trusted inspection, testing, and consultancy solutions for
asset integrity, safety, and reliability.
Auspec Asset Integrity Services (AAIS) is a trusted partner in delivering
specialized inspection, testing, and consultancy solutions that safeguard
the reliability and performance of critical infrastructure.
We provide comprehensive services for asset integrity, safety, and compliance,
offering tailored solutions across the oil & gas, petrochemical, mining,
power generation, and heavy industries. Our team of experienced
engineers, inspectors, and certified technicians utilize advanced technologies
and proven methodologies to deliver accurate results, actionable insights, and
cost-effective outcomes.
Basic NDT
- Dye Penetrant Inspection
- Ultrasonic Testing
- Magnetic Particle Testing
- Eddy Current Testing
- Visual Inspection
- Vacuum Box Testing (Tank & Pipe Welds)
- Videoscopy / Boroscopy
- Hardness Testing
- Ferrite Testing
- PMI / XRF – Positive Material Identification
- Phased Array Ultrasonic Testing (PAUT)
- Time of Flight Diffraction (TOFD)
- Long Range Ultrasonic Testing (LRUT)
- Magnetic Flux Leakage (MFL) – Tank Floor
- Pulsed Eddy Current (PEC)
- Remote Corrosion Scanning (Rapid Motion Scanner)
- Automated Remote Corrosion Mapping – PAUT
- Manual Phased Array Corrosion Mapping
- Spyne - Eddy Current Array Testing
- ACFM Inspection (Surface Crack Detection)
- Internal Rotary Inspection System (IRIS)
- Eddy Current Testing (ECT)
- Remote Field Testing (RFT)
- Near Field Testing (NFT)
- Magnetic Flux Leakage (MFL)
- Alternating Current Potential Drop
- Guided Wave Ultrasonic Testing
- Short Range Ultrasonic Testing
- QSR1
- C-MEC® Remote Field Eddy Current
- Magnetic Bias Eddy Current
- Direct Current Voltage Gradient
- EMAT – Electromagnetic Acoustic Transducer Testing
Auspec Asset Integrity Services (AAIS), we deliver comprehensive Pressure Equipment Inspection services to ensure the safety, reliability, and compliance of your critical assets. Our inspections are conducted in accordance with Australian Standards (S/NZS 3788, AS 1210, AS 4037, AS 4041), API, and ASME codes, giving clients full confidence in equipment performance and regulatory compliance..
- In-Service Inspections
- Fabrication & Construction Inspections
- Hydrostatic & Pneumatic Testing
- Fitness-for-Service Assessments
- MDR Review & Preparation
- Vendor Inspections
- Commissioning Inspections
- Design Verification
- Periodic Inspections
- Condition Assessments
- Risk-Based Inspections (RBI)
- Certification & Reporting
- Regulatory Compliance
Benefits
- Compliance with Australian law
- Improved safety
- Extended equipment life
- Independent assurance
Auspec Asset Integrity Services (AAIS), we provide comprehensive inspection services in accordance with API 653 – Tank Inspection, Repair, Alteration, and Reconstruction. This standard governs the inspection of aboveground storage tanks to ensure their continued safe operation, compliance, and service life extension.
- External & Internal Inspections
- Ultrasonic Thickness Testing (UTT & PAUT)
- Magnetic Flux Leakage (MFL) Floor Scanning
- Annular Plate & Weld Inspection
- Hydrostatic Testing & Commissioning
- Fitness-for-Service (FFS) Assessments (API 579)
- Shell Corrosion Scanning
- Settlement Survey
- Vacuum Box Testing
- Corrosion Rate Calculation
- Remaining Life Calculation
- Repair Recommendations
- Coating Inspection
- Drone Inspection
- ROV Inspection
Benefits
- Enhanced Safety
- Regulatory Compliance
- Cost Savings
- Extended Service Life
- Reduced Downtime
- Accurate Data
- Optimized Maintenance
- Environmental Protection
Auspec Asset Integrity Services (AAIS), we provide complete Pressure Relief Valve (PRV) testing, inspection, and certification services to ensure your safety devices operate correctly and in compliance with statutory requirements. As the last line of defence against overpressure, PRVs must be tested and maintained to guarantee reliable performance.
- In-Situ Testing
- Portable Test Bench
- Tagging & Certification
- Bench Testing & Calibration
- Inspection & Certification
- Servicing & Repairs
- Installation & Replacement
- Database Management
Auspec Asset Integrity Services (AAIS) provides the ability to precisely measure the quantity (volume) of containment systems, storage units, and process equipment. Using advanced methods and technologies in accordance with international codes and standard practices (API, ISO, OIML, ASTM), we deliver accurate calibration of:
- API 650 Atmospheric Storage Tanks
- Pressure Vessels (Horizontal & Vertical)
- Spheres / Spheroids / Spherical Tanks
- Bullet Tanks
- Cylindrical Land Tanks (Horizontal & Vertical)
- Horizontal Above- and Underground Fuel Tanks
- Industrial Silos
- Tanks on Ships & Barges
- Rectangular Tanks / Containers
- Concrete Reservoirs
- Cross-Country Pipelines
- Process & Power Piping
- Stock Piles
Auspec Asset Integrity Services (AAIS) provides a wide range of pressure testing and leak testing solutions to verify the integrity, strength, and leak-tightness of pressure equipment, vessels, tanks, and pipelines. All testing is performed in compliance with relevant Australian Standards (AS), International Codes, and client-specific requirements.
- Hydrostatic & Pneumatic
- Helium Leak Testing / Tracer Gas Testing
- AS 2885.5 Pipeline Testing
- Vacuum Box
- Equipment Range: Calibrated pumps (up to 35,000 kPa)
- Acoustic Imaging Cameras
- Welding Inspection
- Welding Supervision
- Procedure Development
- Welder Qualification
- Failure Analysis & Repair Consultancy
- Stress Analysis & Fitness-for-Service
- Consultancy & Training
- QA/QC System Support
- Material Traceability & Control
- Fabrication Oversight
Heat Exchanger Tube Testing Service
- IRIS (Internal Rotary Inspection System)
- ECT (Eddy Current Testing)
- RFT (Remote Field Testing)
- NFT (Near Field Testing)
- MBET (Magnetic Bias Eddy Current Testing)
- C-MEC® Remote Field Eddy Current
Drone Asset Inspections and Services
- Confined Space Drones (Elios 2)
- Flare Stacks & Chimneys
- Tank Roofs & Internals
- Pipelines & Pipe Racks
- Offshore & Marine Assets
- Bridges & Structural Steelwork
PMI / XRF – Positive Material Identification
Verify chemical composition to prevent mix-ups.
Corrosion Mapping – Automated & Manual
- Automated PAUT Corrosion Mapping
- Manual Ultrasonic Thickness Mapping
- Jireh Navic Base Crawler Modular Motorized Scanner
- Silverwing RMS Scanner
Fitness-For-Service (FFS) Analysis
- Level 1, 2 & 3 Assessments
- Defect Evaluation
- Remaining Life Calculations
- Stress & Fracture Analysis
- Repair & Mitigation Strategies
- Regulatory Compliance
Design & Verification
AAIS provides comprehensive Design & Verification services for pressure vessels, storage tanks, and piping systems in accordance with ASME, API, and Australian Standards. Our expertise includes structural analysis and finite element assessments for roofs, supports, and critical components, ensuring compliance with regulatory and client requirements. We deliver independent verification of new designs, modifications, and repairs, supported by detailed engineering calculations, compliance reports, and certification to guarantee safe and reliable operation of assets throughout their service life
Risk-Based Inspection (RBI) Services
AAIS offers Risk-Based Inspection (RBI) services to optimize inspection strategies for pressure equipment, piping, and storage tanks. By applying API 580/581 methodologies, we assess the probability and consequence of failure to prioritize high-risk components and extend inspection intervals where appropriate. This approach reduces unplanned shutdowns, improves safety, and ensures cost-effective asset management.
Finite Element Analysis (FEA)
AAIS provides advanced Finite Element Analysis (FEA) services to evaluate the structural integrity and performance of pressure vessels, storage tanks, piping systems, and support structures under various operating and loading conditions. Using industry-recognized software such as ANSYS, Abaqus, and STAAD.Pro, our engineering team performs detailed stress, strain, and deformation assessments to identify potential weaknesses and verify compliance with design codes and standards.
Tank, Vessel, and Piping CAD Drafting Services
AAIS provides comprehensive Tank, Vessel, and Piping CAD Drafting Services to support engineering design, fabrication, inspection, and maintenance planning. Our skilled team produces accurate general arrangement drawings, detailed fabrication and nozzle orientation layouts, and integrated P&ID schematics to ensure complete system clarity. We deliver 2D and 3D isometric piping layouts that connect tanks, vessels, and process equipment, enabling efficient construction, modification, and inspection activities.
AAIS offers comprehensive cleaning solutions for tanks, pressure vessels, boilers, condensers, and heat exchanger tubes, ensuring equipment is safe, inspection-ready, and operating at maximum efficiency. Our services cover both industrial cleaning for inspection access and operational performance restoration, tailored to meet the needs of refineries, petrochemical plants, power stations, and storage facilities..
- High-Pressure Water Jetting (Hydroblasting): Effective removal of scale, sludge, and heavy deposits from internal surfaces. (Hydroblasting)
- Chemical Cleaning: Use of controlled chemical solutions to dissolve corrosion products, fouling, and scale without damaging equipment
- Mechanical Tube Cleaning: Rotary and flexible shaft systems for heat exchanger, boiler, and condenser tube restoration.
AAIS provides Biological Activity Reaction Test (BART) services to detect and monitor microbiologically influenced corrosion (MIC) in tanks, pipelines, cooling water systems, and industrial water circuits. BART testing identifies the presence and activity of bacteria such as sulfate-reducing bacteria (SRB), iron-related bacteria (IRB), and slime-forming organisms that accelerate pitting, under-deposit corrosion, and biofouling. .
Types of BART Tests
- IRB-BART™ (Red Cap) – Iron Related Bacteria
- SRB-BART™ (Black Cap) – Sulfate Reducing Bacteria
- SLYM-BART™ (Green Cap) – Slime Forming Bacteria
- HAB-BART™ (Blue Cap) – Heterotrophic Aerobic Bacteria
- FLOR-BART™ (Yellow Cap) – Fluorescing Pseudomonads
- DN-BART™ (Grey Cap) – Denitrifying Bacteria
- N-BART™ (White Cap) – Nitrifying Bacteria
- APB-BART™ (Purple Cap) – Acid Producing Bacteria
- BOD-BART™ (Light Blue Cap) – Biochemical Oxygen Demand
